Hello hello! I'm super excited to share this project with you -- it turned out so beautifully! It's not a huge difference comparing the before and after in most pics, but in real life it is huge. I've been wanting to tackled this for years and finally got it done.
I love bringing you projects that I complete with the help of Minwax -- my favorite stain! And this is one of my all time favorite projects ever in our house, it's just upped a bit with this DIY. I shared how I took the carpet of our stairs seven years ago. I had a dream of making it look custom -- and I did it with only $50 worth of supplies because we had a great start with the wood steps:
You can see this was before our fridge leaked everywhere and ruined the laminate floors in the neighboring room -- soon after we replaced the main floor with wood floors.
When I finished these steps the first time I choose a stain with red tones -- I believe it was Red Oak by Minwax. It doesn't look too red in that photo above, but when you compare it against the wood floors you can see the difference. I thought for sure I took before pics but can't find them, but you can see peeks of the red tone here:
They were a completely different look than the wood floors:
So for years I had wanted to redo them -- but didn't make it a priority until recently. If you look close on that photo above, you can see where the cats tear around that corner and their scratches were starting to look bad. And overall the steps were just looking a little worn after so much use.
So months ago I had the stairs sanded down so I could tackle the restaining -- but then I got caught up in other projects so they sat bare for months!:
I added the tape recently so at least that wasn't there all this time. 😂 I had to clean the bare wood first because they had gotten dirty over the
weeks months that I put off the project.
Then I started the process by staining the steps with the new color -- Jacobean! It's the color we used on the floors but I knew it would go on darker on the stairs. They are pine and the floors are white oak, so they are not a perfect match. The steps are darker than the floors but I quite like it -- if they don't match exactly I'd rather they be darker. Just not red. ;)
Be aware of how different a stain will look on various types of wood! It's amazing how they different they can look.
I always stain the steps first because it's easier to paint over random stain mishaps, but it's a lot more difficult to stain over paint drops. :)
I used these staining pads for the first time and I'm absolutely obsessed with them!:
They make the job go so much faster and aren't as messy as a rag. I adore them and will be using them all the time from now on -- especially on bigger jobs like this.
Now when you stain or polyurethane floors, you have to keep in mind that you can't use them for some time. At least a few hours and that's pushing it with the poly. Last time I did every other step so we could still maneuver up and down the steps. This time I timed it when we were heading out the for the day so we didn't have to worry about it:
Stain dries pretty quick compared to the poly (make sure you wipe down each step after applying the stain!). Too much stain will gum up and take a looong time to dry.
After letting it sit for a couple days to ensure it was completely dry, I moved on to the poly. You can use a foam brush or regular brush. I prefer the foam because I can just toss them after:
But I ran out of them for my second coat so I used a brush that time. ;)
You want to make sure you brush on a nice, even coat of poly each time. Watch for bubbles -- knock as many of those down as you can. Stairs are nice because you don't have to be super picky about the finish -- I'd rather it not be SUPER smooth for safety reasons.
By the way, I get asked a lot if the stairs are slippery. We slid down the carpeted stairs WAY more than we ever have on these. Knock on wood -- it's happened maybe twice maybe?
You cans see how the poly really brings out the wood tone even more:
So pretty! I used this fast-drying polyurethane from Minwax (in semi-gloss) in the can:
By the way -- I didn't even realize they sell poly in a spray can! Mind blown. Keeping that one tucked away for the future.
The wood will not be quite as shiny when it dries unless you use a high gloss:
The risers got a coat of new white paint, and after it was all done it looked so good!:
White and wood -- one of my all time favorite combos! So classic.
See how our pine treads had that rounded edge to start? We lucked out with those -- I remembered that from when we built the house and that's why I tackled this project years back. I know MANY of you have tried this on your stairs over the years and some have had the same, some uncover plywood. It's a toss up!
Here's the landing going to the upstairs:
I get asked about what we used on the landing a lot -- and it was just the basic pine wood (that I've used as shiplap many times over the years). I think each package is around $10 and I think I used two? Three? I wasn't sure if it would hold up but it has -- and it sanded down just fine too!
Our flooring guy offered to replace this with our hardwoods but they've held up so great, I didn't see the need:
I've simplified this view over the years. The art pieces are window grids I found at Goodwill years back. I love them:
The stairs don't look that different from this angle, but when you're on them the difference is huge! No more red!:
These pretty stairs have gone through many updates over the years -- NOW I can safely say tearing that carpet off seven years ago was a GREAT idea! ;)
Wood treads and white risers are my jam. Love it. This was another project I had all the supplies for, so I didn't have to pay for anything during this no spend month!
I will be away at the Haven Conference this week so I'll be back next week! I hope to see some of you there! Have a great weekend my friends!
Affiliate links included for your convenience!
This post was sponsored by Minwax, but all opinions and experiences are my own. I only share brands I use and trust with my readers.